The DK6 system uses the same powerful motors as the DK2+ but has 150mm (6”) of actuator travel. The long travel is suitable for simulating high amounts of suspension travel (dirt ovals, off-roading) or environmental pitch and roll (flight). Although physically much longer, the DK6 is manufactured using the same mono-block machining process as the DK2 and DK2+.
The DK6 motion system is a professional motion system for racing and flight simulators. The system shares the same design and construction as our industrial-grade motion systems used in our full motion vehicle simulators. Additionally, DK6 is mechanically and electrically engineered around our unique motion algorithm to provide the most realistic and representative vehicle motion feedback.
DK6 takes a modern approach to our signal processing and motion control to create the most responsive system on the market. Every elevation change, vehicle movement, surface change and gear shift, is captured and reproduced within 150mm (6”) of the available mechanical stroke.
If you do not have an available network port on your computer. Please feel free to use a USB to Network adapter such as this model available on Amazon.
All motion systems are built to order and ship in 3-5 days from the time of purchase.
Contents:
- mono-block, machined billet actuators with 6” (150 mm) travel
- powerful, responsive and compact American Teknic servo motors
- Total weight capacity (for optimal performance), including fully-loaded simulator with driver:
- 3-actuator system = 600 lb (272 kg)
- 4-actuator system = 800 lb (363 kg)
- billet-machined floating feet with large rubber pads
- aluminum t-slot (80/20) mounting hardware compatible with 25 to 45 series profiles
- single motion controller box (115v/240V compatible) with power and network cables
- two sets of 1m and 2m data and power cables from the controller to actuators
- Sigma’s VelocityTrap™ motion control algorithm & simulation software
- automatic Over-the-Air controller firmware updates
