Your 4 motion actuators move independantly from each other. Your cockpit should be a single entity.
Read More about those stress that motion puts on a cockpit and how the Pro-Motion is able to shrug it all off.
Built to rock, roll, shake and rumble.
It's all about the bolts.
A motion rig should act like a single unit.
Those little corner brackets with 1 bolt per side just doesn't do the job.
No Flex. Stunning Color. Patented Design.
A proud partner of Vention commercial grade aluminum framing.
Vention’s high-precision aluminum extrusion profiles rank best-in-class in terms of structural rigidity, straightness, and precision.
It's all about the core.
We extended the length fo the seat rails by 5 inches to move the middle spreader profile further forward. This enhances the Pro-Motion’s core, improving overall strength and rigidity
360 degrees of options
Pedal Plate 360
Install using the center pivot point to rotate the pedals or free mount any way you choose. With a minimum of 2 bolts attached, your pedals will be rock solid.
Wheel Base Mounting Options
Wheel Deck
compatible with
✅ Fanatec Clubsport, CSL Elite
✅ Logitech G25,G27, G29, G920, G923
✅ Fanatec DD1, DD2,CSL-DD, GT-Pro
✅ Accuforce V1, V2
✅ Thrustmaster TX,T300, T500, T-GT, TS-P, TS-XW
✅ SimMagic M10
✅ Moza R5,R9,R16,R21
Front Mount
compatible with:
✅ All Simucube
✅ Fanatec Clubsport, CSL Elite
✅ MiGe 130st
✅ SimMagic M10, Alpha, Mini, Ultimate
✅ Bondar
✅ VRS Direct Force Pro
✅ Lenze MCS12
Fanatec Mount
compatible with:
✅ Fanatec Podium DD1
✅ Fanatec Podium DD2
✅ Fanatec CSL DD
✅ Fanatec GT DD Pro
Side Mounting Options
Side Mount
22 inch long profile that can be raised or lowered. Can be used on left or right side.
Shifter Plate
Includes:Shifter Mount Plate; Compatible with: Logitech, Thrustmaster, Fanatec
Fanatec Kit
Includes:4 x corner brackets perfectly matching the underside hole locations
Deluxe Kit
Includes: 2 x 180mm (7in) crossbars secured by 4 corner brackets easily mounting any shifter or handbrake.
Triple Deluxe Kit
Includes: 2 x 180mm (7in)+ 1 x 270mm (10.5in) crossbars secured by 6 corner brackets easily mounting any shifter or handbrake or a combination of both.
AnyMount
Includes: 1 x 14in (360mm) upright, 1 x 12.4in (315mm) cross profile, 2 x 10.6in (270mm) mounting profiles, 4 extra to use to mount your device.
Pro-Motion Specifications
Included
Pro-Motion Frame
- Azure blue anodized aluminum extruded profiles.
- All Vention Industrial Strength Brackets
- M8 Steel Bolts (class 12.9)
- M8 Spring Loaded Drop in T-Nuts
- M8 Steel Bolts (class 12.9)
- M8 Spring Loaded Drop in T-Nuts
Pedal Plate 360
- Pedal Plate 360 x 2
- 385mm 45x90 Aluminum Profile x 2
- M8 Steel Bolts (class 12.9)
- M8 Spring Loaded Drop in T-Nuts
Choice of Wheel Mount
- Wheel Deck, Front Mount (+$) Or Fanatec Mount
- 2 x 9.5mm Side Wheel Mount Adjustable Connector Plates
- M8 Steel Bolts (class 12.9)
- M8 Spring Loaded Drop in T-Nuts
Premium Packaging
- All parts identified and separated by assembly.
- Welcome package with detailed step by step instructions.
- Full set-up support throughout the assembly process.
- "Connect Your Gear" . All bolts and Nuts to attach your wheel, pedals, shifter, seat, etc
Essentials Kit
- Extra T-Nuts
- Extra M8 Bolts
- Velcro Tie Wraps
- 5mm Allen Key
- 6mm Allen Key
- Mount My Gear Kit
Options
Base Plates & Sim Feet
- 4 x 3 hole 9.5mm thick baseplates
- 4 x 120mm high Levelling feet x 4
- 80mm Scratch Resistant Rubber Base
- Flanged Head M12 Steel Nuts
- M8 Steel Bolts (Class 12.9)
- M8 Spring Loaded Drop in T-Nuts
Side Shifter Mount
- 1 x 22 inch horizontal mounting Aluminum Extrusion
- 1 x 16 inch Vertical Aluminum Profile
- 7 x 45x45mm Corner Brackets
- M8 Steel Bolts (Class 12.9)
- M8 Spring Loaded Drop in T-Nuts
- As Ordered ; Stadard / Shifter Plate / Fanatec Kit / Deluxe Kit
Pro-Motion Dimensions
Length: 1395mm / 55inches
Width: 675mm / 26.5 inches
Height: 720mm / 28.3 inches