Pro-Motion


Pro-Motion

Ready to Rock and Roll.


The Pro-Motion sim racing cockpit was engineered specifically for adding motion actuators systems.
Actuators can add up to 4 independent high torque motors to your rig.

The Pro-Motion was engineered to decrease the stress and increase the simulation.

*motion system not included

starting from $1049 USD

Motion systems add stress to a rig.


The Pro-Motion has been engineered to dismiss the stress and leave the drivers with the most realistic driving experience possible.

Engine Vibration

The engine vibration is a high frequency haptics layer that requires a properly constructed chassis to translate and resonates the vibrations effectively. All in 1 Gaming uses the highest quality aluminum extrusions and connections to ensure that all vibrations are properly translated into the seat.

Sway / Turning Roll

Roll and sway are both responsive motion layers that highlight the driver’s steering input. Proper chassis width and actuator placement is required to achieve the best roll and sway movements. The Pro-Motion chassis features extensive reinforcement and component selection, such as seat rails, to ensure optimal communications of this motion layer.

Gas/Brake

Surge is very responsive and highlights the driver’s pedal inputs. Surge also induces pitch naturally, and this layer replicates the responsiveness of surge by converting to responsive pitch movements. The Pro-Motion chassis is designed to take repetitive jerky pitch motions to replicate exact brake engagement.

Bumps

The heave motion layer captures the low-frequency up-and-down movement of the vehicle. The layer is very important in determining how much load the vehicle has and how much potential traction the drive can expect. The Pro-Motion chassis is designed to repeated handle, momentary up and down stress loads on the chassis, and communicates directly to the driver.


Included

Framing

Patented Design.

No Flex.

Stunning Color.

Vention Profiles.

Vention’s high-precision aluminum extrusion profiles rank best-in-class in terms of structural rigidity, straightness, and precision.


Pedal Mounting

Pedal Plate 360

Install using the center pivot point to rotate the pedals or free mount any way you choose. You can attach via 7 bolts per side, although with a minimum of 2 bolts, your pedals will be rock solid.

  WheelBase Mounting

Wheel Deck Mount

Wheel Deck Mount plate 9.5mm (3/8 inch)

2 x adjustable side wheel mount
plates 9.5mm (3/8inch)

Made in Canada with Aluminum 6061
Powder coated in black

Compatible with:

Logitech G25, G27, G29, G920, G923
Thrustmaster TX,T300, T500, T-GT,
TS-P, TS-XW
Fanatec DD1, DD2,CSL-DD, GT-Pro
Fanatec Clubsport (all), Fanatec CSL Elite
Accuforce V1/V2

Front Wheel Mount

Front Wheel Mount plate 12.7mm (1/2 inch)

2 x adjustable side wheel mount
plates 9.5mm (3/8inch)

Made in Canada with Aluminum 6061
Powder coated in black

Compatible with:

All Simucube 1, 2, Sport, Pro & Ultimate
SimMagic M10, SimMagic Alpha, SimMagic Mini
VRS Direct Force Pro
MiGe 130st
Lenze MCS12
Bondar
Fanatec Clubsport

Fanatec DD Mount

2 x adjustable side wheel mount
plates 9.5mm (3/8inch)

Made in Canada with Aluminum 6061
Powder coated in black

Choice between both CSL DD and Podium

Compatible with:

Fanatec Podium DD1
Fanatec Podium DD2
Fanatec CSL DD
Fanatec GT Pro

Options

Base Plate & Sim Feet Option

Made from

9.5mm thick

high grade aluminum 6061 for strength and powder coated in black for beauty and resistance.


Joined with

3 mounting holes

that effortlessly attach to the frame using high quality M8 bolts.


Includes

M12 leveling feet

with 100mm rod giving the rig further adjustability in terms of frame height and levelling capabilities.


Corner Brackets Option

Solid. Precise. Robust.

Upgrade to:
Vention Brackets

Vention’s high-precision brackets are designed to be combined with Vention’s extrusions, creating high-performance assemblies. They have been engineered with self-positioning “V-shape” locators, enabling precision assembly that cannot typically be done with conventional extrusion system.

Additionally, each locator connection node can carry up to 25% more payload than brackets without V-shaped grooves.



  Side / Shifter Mounting

Side Mount

585mm (23in) long
45X90mm profile
360mm (14in) high
45x45mm profile
Can easily be raised or lowered, Can be mounted on the right or left side.

add Shifter Plate

Adds to the Side Mount:

Shifter Mount Plate;
Compatible with: Logitech, Thrustmaster, Fanatec

add Fanatec Kit

Adds to the Side Mount:

4 x corner brackets perfectly matching the underside hole locations

add Deluxe Side Kit

Adds to the Side Mount:

2 x 180mm (7in) crossbars secured by 4 corner brackets on the 45x90 long profile

Pro-Motion Package Contents

Included

Pro-Motion Frame Assembly

1395mm 90x90mm Aluminum Profile x 2
720mm 45x90 Aluminum Profile x 2
405mm 45x90 Aluminum Profile x 3
495mm 45x45 Aluminum Profile x 2
90x90mm Corner Brackets x 6
45x45mm Corner Brackets x 16
M8 Steel Bolts (class 12.9)
M8 Spring Loaded Drop in T-Nuts

Wheel Mount

Choice of Wheel Mount
9.5mm Side Wheel Mount Adjustable Connector Plates x 2
M8 Steel Bolts (class 12.9)
M8 Spring Loaded Drop in T-Nuts

Pedal Plate 360

Pedal Plate 360 x 2
385mm 45x90 Aluminum Profile
385mm 45x45 Aluminum Profile
M8 Steel Bolts (class 12.9)
M8 Spring Loaded Drop in T-Nuts

Premium Packaging & Service

All parts identified and separated by assembly
Welcome package with detailed step by step instructions
Full set-up support throughout the assembly process
"Connect Your Gear" All bolts and Nuts to attach your wheel, pedals, shifter

Essentials Kit

Extra T-Nuts x 10
Extra M8 20mm Bolts x 10
Velcro Tie Wraps x 10
5mm Allen Key
6mm Allen Key
Mount My Gear Kit

Options

Option Side/Shifter Mount

585mm 45x90 Aluminum Profile x 1
405mm 45x45 Aluminum Profile x 1
45x45mm Corner Brackets x 5
M8 Steel Bolts (Class 12.9)
M8 Spring Loaded Drop in T-Nuts
As Ordered ;
Shifter Plate / Fanatec Kit / Deluxe Kit

BasePlate & Sim Feet

3-hole 9.5mm thick baseplates x 4
100mm high Levelling feet x 4
80mm Scratch Resistant Rubber Base x 4
Flanged Head M12 Steel Nuts x 8
M8 Steel Bolts (Class 12.9)
M8 Spring Loaded Drop in T-Nuts

Pro-Motion Dimensions

Length: 1395mm / 54.9 inches
Width: 675mm / 26.5 inches
Height: 720mm / 28.3 inches
Sim Feet adds 100mm (4.4 inches) to the height
and 90mm (3.35inches) to the width

Your Pit Crew


Find us using any platform that works for you.
Our team is online and happy to help.


Email

Web Chat

Skype

WhatsApp

Messenger

Your parts will work with our frames.   Guaranteed.

We include all necessary fasteners to connect your gear to your new
All in 1 Gaming frame.
There is no extra charge for this service.
Use this form to let us know what gear you will be using with your new frame.