$1,099.00

All in 1 Pro

Availability:
in stock, leaves warehouse within 3-5 days

Configure

  • LEARN MORE
  • LEARN MORE
  • LEARN MORE
  • LEARN MORE
  • LEARN MORE
    • LEARN MORE
    • LEARN MORE
    • LEARN MORE
    • LEARN MORE
    • LEARN MORE
    • LEARN MORE
    • LEARN MORE
    • LEARN MORE
    • LEARN MORE
    Adding to cart… The item has been added
    $1,099.00

    Includes 30 minutes of free video chat support via Skype for all Rig purchases. If anyone is stuck during assembly, we would be happy to help out and guide you through the process.

    Includes most mounting nuts and screws needed to mount your gear.  After purchase, you will be emailed a form input your chair, wheelbase, pedals, shifter , etc. so that we can include what you need to mount your gear to your new cockpit.

    Connect Your Gear Form

    The Pro Series racing simulator cockpit is one of the strongest frames on the market.  With a base length made from 90mm x 90mm commercial grade aluminum profiles connnected to 90x90mm brackets, this cockpit has no flex with even the mightiest of wheelbases.

    This framing architecture results in the same strength typically found 180x40mm side profile but with a smaller footprint!

    Additional strength is provided by 4 x 1/2inch thick plates with 7 mounting points not only holding the frame together but also fully supports the frame along the entire perimeter.

    Pedal mounting includes 12 x M6 t-nuts and 12x M6 14mm bolts and 12 M6 18mm bolts.

    *monitor, chair, wheel and pedals for illustration purposes only and sold seperatly.

    Pro Assembly Instructions

     

     

    1 year warranty

    The Pack Leader

    Our most popular cockpit was designed with attention to detail and an all-inclusive design. Made to handle any high torque direct drive wheelbase, this frame has no bottlenecks whatsoever.

    PRO STRENGTH

    90x90mm framing makes this a beast.

    PRO STYLE

    This cockpit demands attention.

    PRO DESIGN

    A widened stance shows it's might.

    Pro Hightlights

    Best in class Framing

    Revolutionary Pedal Mounting

    Next Generation Sim Feet

    Pro Specifications

    All in 1 Pro Model includes


    • Pro Racing Sim Frame
    • All connectors, plates, fasteners and bolts
    • Step by Step assembly instructions with online assembly videos

    Choice of Wheel Mount - included


    • Wheel Deck Mount Compatibility;
      • Logitech G25, G27, G29
      • Thrustmaster TX, T300, T500, T-GT, TS-P, TS-XW
      • Fanatec DD1, DD2, , CSL DD (new), CSL Elite, Clubsport
      • Accuforce V1/V2
    • Front Wheel Mount Compatibility;
      • Fanatec Clubsport
      • All Simucube 1, 2, Sport, Pro & Ultimate
      • SimMagic M10, SimMagic Alpha
      • VRS Direct Force Pro
      • MiGe 130st, Lenze MCS12
    • Fanatec Podium Mount Compatibility;
      • Fanatec Podium DD1,DD2, CSL DD (new)

    All in 1 Gaming Essentials Kit - included


    • 2 x spare profiles, 45x45mm, 495mm in length
    • 10 extra M8 bolts and T-Nuts
    • Bondhus high grade Allen Key set
    • M8 long Hex key, to easily assemble your rig
    • 13mm wrench
    • 10 x tie wraps

    Pedal Mount - included


    • To mount your pedals;
      • 1 x 385mm (15.2inches) long 45X90mm aluminum profile
      • 1 x 385mm (15,2inches) long 45x45mm aluminum profile
      • mounting hardware of your choice
    • Pedals mount with bolts either upwards or downwards through 4 included corner brackets
    • Pedal mount can be raised by 90mm (3.5inches) and rotated 360 degrees.
    • Can easily be raised or lowered.
    • Compatible with any pedals less than 385mm in width with 4 mounting positions (each pedal)

    Sim Feet - included


    • 9.5mm thick plate is secured the frame underneath.
    • 80mm Nylon Base comes with 2 mounting holes to secure the base to the floor if needed
    • Base made with anti-vibration rubber pad
    • Includes M12 x 55mm rod with flanged underneath resting bolt
    • included M12 top bolt secures the unit in place

    Side / Shifter Mount - option


    • 585mm (23.3inches) long 45X90mm profile
    • 360mm (14.2inches) high 45x45mm profile support for height adjustement
    • Can easily be raised or lowered.
    • Can be mounted on the right or left side.
    • Option for Shifter Mount Plate; Compatible with: Logitech, Thrustmaster, Fanatec

    Pro Version Side / Shifter Mount - option


    • for shifter / brake models that include top mounting M8 or M6 bolts into an M6 or M8 t-nut
    • includes 4 x M8 t-nuts and 4 x M6 t-nuts
    • 585mm (23.3inches) long 45X90MM aluminum profile
    • 360mm (14.2inches) high 45x45mm support for height adjustment
    • Can easily be raised or lowered
    • Can be mounted on the right or left side
    • 2 x 180mm (7.1inch) crossbars secured by 4 corner brackets on the 45x90 long profile
    • extra corner bracket to secure the 360mm height profile

    Pro Model Sim Dimensions


    • Frame Length: 1395mm / 54.9 inches
    • Frame Width: 675mm / 26.7 inches
    • Frame Height 720mm / 28.7 inches
    • Sim Feet: Adds 55mm (2.2 inches) to the height

    looking for a plug and play full solution?The All in 1 Ready to Race Edition

    This is the "dont make my life more difficult, just give me everything i need and make sure it's good" model. Everything you need to get going is included. Even the software has been set up for you.

    buy ready to race edition

    All Of Our Models Come With TheALL IN 1 ESSENTIALS KIT

    These essentials are included with each frame. It’s all part of the All in 1 Experience

    M8 HEX KEY

    The Main tool to build your sim, allows for greater torque and easier access

    SPARE PARTS

    10 Extra Nuts & Bolts
    2 x spare 16inch extrusions

    BONDHUS ALLEN KEY SET

    Set of 9 Hex L-Wrenches, Sizes 1.5-10mm

    CABLE TIES

    Cable Management

    13MM WRENCH

    We go nuts for bolts